LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2003 >> Grand Cherokee Overland >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Body Control Modules) >> Removal & Installation >> Body Control Module >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Body Control Module: Installation

WARNING: This page is about a different car, the 2002 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the Body Control Module (BCM) to its mounting location.
  2. Align the terminal pins of the BCM connector with the connector on the JB.
  3. Engage the BCM integral connector into the JB.
  4. Install the four screws. Tighten the screws to 20 INCH lbs. (2.2 N.m).
  5. Connect the two instrument panel wire harness connectors to the BCM.
  6. Reinstall the instrument panel fuse cover to the bottom of the BCM and JB unit.
  7. Connect the battery negative cable.
scientia non olet · About LEMON Manuals