Torque Specifications
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |
|---|---|---|
| A/C Compressor Rear Brace Bolts | ||
| 4.0L | 30-41 (40-55) | |
| 4.7L | 26-33 (35-45) | |
| A/C Compressor-To-Engine Block Mounting Bolts | 33-48 (45-65) | |
| Discharge Line-To-Condenser Inlet Retaining Nut | 20.7 (28) | |
| Suction Line-To-Accumulator Fitting | 20.7 (28) | |
| Suction Line & Discharge Line-To-Manifold On Compressor | 18.7 (25.4) | |
| INCH Lbs. (N.m) | ||
| A/C Compressor Shaft Bolt | 115 (13.0) | |
| A/C Heater Control-To-Instrument Panel Bolt | 20 (2.2) | |
| A/C-Heater Unit Retaining Nuts | ||
| Engine Compartment | 62 (7.0) | |
| Passenger Compartment | 40 (4.5) | |
| Blend Door Actuator-HVAC Bolt | 20 (2.2) | |
| Blower Motor In HVAC Housing Screw | 20 (2.2) | |
| Blower Motor Resistor-To-HVAC Screw | 20 (2.2) | |
| Expansion Valve Bolts | 100 (11) | |
| Floor Heat Ducts Mounting Screws | 20 (2.2) | |
| Heater Core & Retainers-To-HVAC Housing Screws | 20 (2.2) | |
| Heat/Defrost Door Sub-Assembly Mounting Screws | 20 (2.2) | |
| Heat/Defrost Door Actuator Mounting Screws | 20 (2.2) | |
| Panel/Defrost Door Actuator-To-HVAC Housing Bolt | 20 (2.2) | |
| Recirculation Door | ||
| Housing-To-HVAC Bolt | 20 (2.2) | |
| Vacuum Actuator-To-HVAC Bolt | 20 (2.2) | |
| Vacuum Reservoir Bolt | 30 (3.4) | |