Seat Temperature Control Module: Service and Repair

Fig.16 Heated Seat Module Location:

REMOVAL
1. Working under the front seat cushion, remove the heated seat module from its mounting bracket by gently prying the module off of the two mounting pushpins.
2. Disconnect the seat wire harness connector from the connector receptacle on the side of the heated seat module.
3. Remove the heated seat module from the vehicle.

INSTALLATION
1. Connect the seat wire harness connector to the connector receptacle on the side of the heated seat module.
2. Install the heated seat module on its mounting bracket under the front seat.
3. Verify heated seat system operation.