LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2003 >> Wrangler SE, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules >> Controller Antilock Brake >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Controller Antilock Brake: Removal

  1. Remove the negative battery cable from the battery.
  2. Pull up on the CAB harness connector release (Fig 1) and remove connector.
    Fig 1: Removing Cab Harness Connector
    G02711583Courtesy of DAIMLERCHRYSLER CORP.
  3. Remove the pump connector from the CAB.
  4. Remove the CAB mounting bolts.
  5. Remove the CAB from the HCU (Fig 2).
    Fig 2: Removing/Installing CAB From HCU
    G02711584Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals