LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2003 >> Wrangler X, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (2.4L Engine) >> Front Mount >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Front Mount: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the insulator mount assembly (Fig 1) and (Fig 2).
    Fig 1: Installing LH Engine Mount Assembly
    G02711963Courtesy of DAIMLERCHRYSLER CORP.
    Fig 2: Installing RH Engine Mount Assembly
    G02711964Courtesy of DAIMLERCHRYSLER CORP.
  2. Tighten the mount to engine bolts.
  3. Loosely install the front engine mount through bolt to the insulator.
  4. Lower the engine.
  5. Tighten the through bolt.
  6. Lower the vehicle.