LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2003 >> Wrangler X, Standard >> Repair and Diagnosis >> General Information >> Specifications Index >> Common Specs & Procedures >> Air Conditioning >> Manual System >> Torque Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Torque Specifications

TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
A/C Compressor Mounting Bolts (2.4L) 21 (28)
A/C Compressor Mounting Bolts (4.0L)
Compressor-To-Block 33-48 (45-65)
Rear Brace-To-Compressor 30-41 (40-55)
Discharge Support Bracket To Compressor Bolt 21 (28)
Suction & Discharge Line Manifold-To-Compressor Bolt 16 (22)
INCH Lbs. (N.m) 
A/C-Heater Control Panel Screws 20 (2.2)
Accumulator Retaining Band Screws 40 (4.5)
A/C Heater Control Mounting Screws 20 (2.2)
A/C Heater Control To Instrument Panel Bolt 20 (2.2)
A/C Heater Housing To Plenum Bracket Bolt 30 (3.4)
A/C Housing Mounting Studs (Engine Side) 55 (6.2)
Blend Air Door Motor Mounting Screws 10 (1)
Compressor Shaft Bolt 115 (13)
Condenser Bracket To Bottom Grill Panel Bolt 20 (2.2)
Condenser To Grill Panel Bolt 72 (8)
Evaporator Coil Tube Clamp Mounting Screws 20 (2.2)
HVAC Housing Retaining Screws 20 (2.2)
Liquid Line Fastener To Condenser Bolt 80 (9)
Outlet Jumper Block Fittings To Condenser 105 (12)
Upper To Lower HVAC Halves 20 (2.2)