LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2004 >> Liberty Limited, 4WD, Part Time >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Diagnostic Procedures >> System Description And Functional Operation >> Body Control Module >> Overhead Console >> Electronic Vehicle Information Center (EVIC) >> Reset Button
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Reset Button

The RESET Button has two different functions:

  1. To clear the trip functions that may be reset
  2. To enter and exit the diagnostic mode

Pressing the RESET button once will clear the trip function that is currently being displayed and the EVIC will send a PCI bus beep request to the BCM. If the RESET button is pressed again within 3 seconds, the EVIC will reset ALL of the resettable trip functions and an additional beep request is sent to the BCM. The trip functions that may be reset are:

A reset will only occur if one of the trip functions that may be reset is currently being displayed. The EVIC module will send a beep request to the BCM.

Simultaneously pressing the RESET button and the C/T button while turning the ignition from Off to On will enter the EVIC into the self-diagnostic mode. The EVIC self-diagnostic mode may also be initiated using the DRBIII®.

scientia non olet · About LEMON Manuals