Removal - Speed Control Servo

Disconnect negative battery cable at battery.
Disconnect vacuum line at servo. See Fig 1.

Fig 1: Locating Speed Control Servo
Courtesy of DAIMLERCHRYSLER CORP.
Disconnect electrical connector at servo.
Disconnect servo cable at throttle body. See CABLE .
Remove three bracket mounting bolts.
Remove 2 mounting nuts holding servo cable sleeve to bracket.

Fig 2: Removing & Installing Servo Cable Clip - Typical
Courtesy of DAIMLERCHRYSLER CORP.
Pull speed control cable sleeve and servo away from servo mounting bracket to expose cable retaining clip and remove clip.

NOTE: The servo mounting bracket displayed is a typical bracket and may/may not be applicable to this model vehicle. See Fig 2.

Remove servo from mounting bracket. While removing, note orientation of servo to bracket.