LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2005 >> Liberty Limited, 2.8 5, Automatic >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition Control >> Glow Plug >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Glow Plug: Installation

  1. Install glow plugs all the way into cylinder head, hand tight, until the thread stops. See Figure.
  2. Tighten glow plugs to 12.5 N.m (110 in.lbs.).
  3. Connect glow plug electrical connectors. See Figure.
  4. Install intake manifold air inlet tube. See Figure.
  5. Install generator (Refer to ELECTRICAL/CHARGING/GENERATOR - INSTALLATION) .
  6. Connect negative battery cable.
scientia non olet · About LEMON Manuals