Hard Wired Inputs
The hard wired inputs to the BCM include the following:
- A/C on/off control
- BCM flash enable
- Door lock switch mux
- Driver door ajar switch sense
- Flip-up glass ajar switch sense
- Flip-up glass release switch sense
- Front fog lamp switch sense
- Front wiper park switch sense
- Front wiper switch mux
- Fused B(+)
- Fused ignition switch output (run-acc)
- Fused ignition switch output (run-start)
- Headlamp switch mux
- High beam switch sense
- Hood ajar switch sense - with VTSS - in markets where required only
- Key-in ignition switch sense
- Left rear door ajar switch sense
- Lightbar switch sense - Renegade with light bar only
- Panel lamps dimmer switch mux
- Passenger front door ajar switch sense
- Radio control mux - with remote radio switches only
- Rear courtesy lamp control
- Rear window defogger control
- Rear wiper intermittent driver
- Rear wiper on driver
- RHD input - connected to ground on right-hand drive models only
- Right rear door ajar switch sense
- Tailgate ajar switch sense
- Washer pump driver
- Vehicle speed signal
Refer to SYSTEM WIRING DIAGRAMS for additional details.