Hard Wired Outputs
The hard wired outputs of the BCM include the following:
- Accessory delay relay control - power sunroof only
- Courtesy lamp driver
- Courtesy lamp load shed
- Door lock relay control
- Door unlock relay control
- Driver door unlock relay control
- Flip-up glass release motor driver
- Front fog lamp relay control
- Front wiper high/low relay control
- Front wiper on/off relay control
- Fused B(+) - lock, unlock and driver unlock relay feed
- Hazard lamp control
- High beam relay control
- Horn relay control
- Instrument cluster wake up signal
- Low beam relay control
- Park lamp relay control
- Rear fog lamp relay control - with rear fog lamps in markets where required only
- Rear window defogger relay control
- Tailgate lock driver
- Tailgate unlock driver
- Vehicle speed output
- Vehicle speed sensor supply - except with Antilock Brake System (ABS)
- VTSS indicator driver - with VTSS only
Refer to SYSTEM WIRING DIAGRAMS for additional details.