LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> G-Switch >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Anti-Lock Brake System: G-Switch: Installation

CAUTION: The mercury switch (inside the G-switch), will not function properly if the switch is installed incorrectly. Verify that the switch locating arrow is pointing to the front of the vehicle. See Figure.
  1. Position switch on mounting bracket.
  2. Install mounting bolts and tighten to 4-5 N.m (35-45 in. lbs.)
  3. Connect harness to switch.
  4. Place carpet back into position.
scientia non olet · About LEMON Manuals