LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2005 >> Wrangler X, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 519 (Message Systems) >> Overhead Console >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Overhead Console: Installation

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the overhead console in the vehicle and connect the wire harness connectors.
  2. Connect the control module, courtesy lamps and power sunroof switch electrical connectors, if equipped.
  3. Grasp the sides of the overhead console and push straight up evenly to engage the two snap clips at the rear of the unit.
  4. Install the overhead console retaining screw, located in the front of console near the windshield. Torque the screw to 1.2 N.m (10 in. lbs.).
  5. Connect the negative battery cable.
scientia non olet · About LEMON Manuals