LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2006 >> Commander Base, 3.7 K, AWD >> Repair and Diagnosis >> Body & Frame >> Frames, Subframes & Crossmembers >> Frame & Bumpers >> CROSSMEMBER-Rear/Transmission >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Frame & Bumpers: CROSSMEMBER-Rear/Transmission: Installation

Fig 1: Crossmember & Fasteners
GC0027815Courtesy of DAIMLERCHRYSLER CORP.
  1. Install the crossmember and install the eight crossmember bolts (2).
  2. Tighten the crossmember bolts to 54 N.m (40 ft. lbs.).
  3. Remove the lifting device.
  4. Install the four transmission mount bolts (1) and tighten to 54 N.m (40 ft. lbs.).
  5. Install the skid plate. (Refer to FRAME & BUMPERS/FRAME/SKID PLATE-TRANSFER CASE - INSTALLATION) .
scientia non olet · About LEMON Manuals