LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2006 >> Commander Base, 3.7 K, AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System (Service Information) >> Sensor-Front Wheel Speed >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Sensor-Front Wheel Speed: Removal

  1. Raise and support the vehicle.
  2. Remove the tire and wheel assembly.
  3. Remove the caliper adaptor bolts. Support the caliper and adaptor assembly Do Not let assembly hang by the hose. (Refer to BRAKES/HYDRAULIC/MECHANICAL/DISC BRAKE CALIPERS - REMOVAL) .
  4. Remove the disc brake rotor (Refer to BRAKES/HYDRAULIC/MECHANICAL/ROTORS - REMOVAL) .
    Fig 1: Removing/Installing Wheel Speed Sensor
    GC0026763Courtesy of DAIMLERCHRYSLER CORP.
  5. Remove the front wheel sensor mounting nut (2) to the hub (3).
  6. Remove the wheel speed sensor (1) from the hub (3).
    Fig 2: Remove/Install Wheel Speed Connector
    GC0026853Courtesy of DAIMLERCHRYSLER CORP.
    1 - ELECTRICAL CONNECTOR
    2 - CLIP
  7. Disconnect the wire sensor routing clips (2).
  8. Disconnect the wheel speed sensor wire connector (1).
  9. Remove the sensor and wire.
scientia non olet · About LEMON Manuals