Sensor-Boost Pressure: Installation
WARNING: This page is about a different car, the 2006 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - AIR FLOW CONTROL VALVE |
| 2 - BOOST PRESSURE SENSOR |
| 3 - CHARGE AIR CROSS OVER TUBE |
| 4 - EGR TUBE |
- Position the boost pressure sensor onto the charge air cross over tube and install the fasteners. See Fig 1. Tighten the fasteners to 9 N.m (80 in. lbs.).
- Connect the sensor wiring harness connector.
- Connect the negative battery cable.