LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2006 >> Commander Base, 3.7 K, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 121 (Ignition System (Service Information)) >> Plug-Glow >> Removal >> Glow Plug
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Glow Plug

WARNING: This page is about a different car, the 2007 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Engine temperature must be at least 90°C (194°F) before removing glow plugs. If cylinder head is already removed, warm cylinder head to 90°C (194°F) before removing glow plugs.
  1. Disconnect negative battery cable.
  2. Remove engine cover. Refer to REMOVAL .
  3. Disconnect glow plug electrical connector (1).
    WARNING: Risk of injury to skin and eyes from handling hot or glowing objects. Wear protective gloves, clothing and eye wear.
  4. Clean glow plug bay.
  5. Remove glow plugs.
scientia non olet · About LEMON Manuals