LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2006 >> Commander Base, 3.7 K, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (5.7L Engine (Service Information)) >> Air Intake System >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Air Intake System: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install filter element into housing.
  2. Position housing cover into housing locating tabs.
  3. Pry up 4 spring clips and lock cover to housing.
  4. Install air duct to air cleaner cover and tighten hose clamp to 5 N.m (45 in. lbs.) torque.
  5. If any other hose clamps were removed from air intake system, tighten them to 5 N.m (45 in. lbs.) torque.
  6. If any bolts were removed from air resonator housing or air intake tubing, tighten them to 5 N.m (45 in. lbs.) torque.
scientia non olet · About LEMON Manuals