Module-Adjustable Pedals: Installation
CAUTION:
The Adjustable Pedals Module mounting tabs can be damaged during module installation. Use care to properly align tabs to prevent binding that could result in tab breakage.
- Place the module (4) into position making sure the mounting tabs are properly aligned with the front bracket.
- Push down on the rear of the module (4) snapping the retaining clips into place in the side brackets.
- Connect the adjustable pedals module rear harness connectors (1).
- Connect the adjustable pedals module front harness connectors.
- Install the driver seat cushion/cover (2) (Refer to BODY/SEATS/SEAT CUSHION COVER - INSTALLATION) .
- Connect the battery negative cable.
- Verify system and vehicle operation.