LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2006 >> Commander Base, 4.7 N, RWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Module-Engine Control >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module-Engine Control: Installation

Fig 1: ENGINE CONTROL MODULE (ECM) REMOVAL & INSTALLATION
GC0045388Courtesy of DAIMLERCHRYSLER CORP.
1 - ECM ELECTRICAL CONNECTORS
2 - ENGINE CONTROL MODULE (ECM)
3 - ECM MOUNTING BRACKET
4 - ECM MOUNTING BRACKET MOUNTING STUDS
5 - MOUNTING BRACKET RETAINING NUTS
  1. Install Engine Control Module (ECM) on bracket (3).
  2. Position ECM and bracket assembly in vehicle.
  3. Install ECM bracket to inner fender retaining nuts (5).
  4. Connect ECM electrical connectors (1).
  5. Connect negative battery cable.
scientia non olet · About LEMON Manuals