Power Seat Control Module: Service and Repair

HEATED SEAT MODULE

REMOVAL




1. Working under the front seat cushion (1), remove the heated seat module (2) from its mounting bracket by gently prying the module off of the two mounting pushpins.
2. Disconnect the seat wire harness connector (3) from the connector receptacle on the side of the heated seat module (2).
3. Remove the heated seat module from the vehicle.

INSTALLATION




1. Connect the seat wire harness connector (3) to the connector receptacle on the side of the heated seat module (2).
2. Install the heated seat module (2) on its mounting bracket under the front seat (1).
3. Verify heated seat system operation.