LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2006 >> Wrangler X, Standard >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension System >> Front >> Upper Control Arm >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Upper Control Arm: Installation

  1. Position the upper suspension arm at the axle and frame rail.
  2. Install the bolts and finger tighten the nuts.
  3. Remove the supports and lower the vehicle.
  4. Tighten the nut at the axle and frame brackets to 81 N.m (60 ft. lbs.).
scientia non olet · About LEMON Manuals