LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2006 >> Wrangler X, Standard >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension System >> Rear >> Lower Control Arm >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Lower Control Arm: Installation

  1. Position the lower suspension arm in the axle bracket and frame rail mount.
  2. Install the mounting bolts and finger tighten the nuts.
  3. Remove the supports and lower the vehicle.
  4. Tighten the lower suspension arm nuts to 203 N.m (150 ft. lbs.).
scientia non olet · About LEMON Manuals