LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2007 >> Compass Limited, AWD, Automatic CVT >> Repair and Diagnosis >> Electrical >> Gauges >> Message Center System (Service Information) >> Universal Transmitter >> Standard Procedure >> Erasing Transmitter Codes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Erasing Transmitter Codes

NOTE: Individual channels cannot be erased. Erasing the transmitter codes will erase ALL programmed codes.

To erase programming from the three buttons (individual buttons cannot be erased but can be "reprogrammed"), follow the step noted:

  1. Press and hold the two outer HomeLink® buttons until the indicator light begins to flash after 20 seconds. Release both buttons. Do not hold for longer that 30 seconds. HomeLink® is now in the train (or learning) mode and can be programmed at any time beginning with "Programming". See STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals