Fuel Tank Module

Fig 1: Fuel Tank Module Location-Diesel

Courtesy of CHRYSLER LLC

1 - LOCKRING

2 - FUEL TANK MODULE

3 - ELECTRICAL CONNECTOR

4 - CHECK VALVE

5 - FUEL VENT HOSE

6 - FUEL FILL HOSE

7 - FUEL RETURN LINE CONNECTION

8 - FUEL SUPPLY LINE CONNECTION

The fuel tank module (2) is located on top of the fuel tank. See Fig 1.

Fig 2: Fuel Pump Module Location

Courtesy of CHRYSLER LLC

1 - 1/2" BREAKER BAR

2 - TOP OF FUEL TANK (TYPICAL)

3 - SPECIAL TOOL #9340

4 - FUEL TANK MODULE (TYPICAL)

5 - MODULE LOCK RING

Drain and remove fuel tank. Refer to Fuel Tank Removal/Installation.
Note rotational position of module before attempting removal. An indexing arrow is located on top of module for this purpose.
Position Special Tool 9340 (3) into notches on outside edge of lockring (5). See Fig 2.
Install 1/2 inch drive breaker bar (1) to tool 9340 (3). See Fig 2.
Rotate breaker bar counter-clockwise to remove lockring.
Remove lockring. The module will spring up slightly when lockring is removed.
Remove module from fuel tank. Be careful not to bend float arm while removing.