LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2008 >> Commander Base, 3.7 K, RWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Infotainment >> Navigation System & Telecommunication System (Service Information) >> Navigation/Telecommunication - Service Information >> Module-Hands Free >> Removal >> Module-Hands Free
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module-Hands Free

Fig 1: Removing/Installing Electrical Harness Connector & Mounting Bracket Fasteners
GC0029272Courtesy of CHRYSLER LLC
  1. Disconnect and isolate the battery negative cable.
  2. Remove the right side cowl panel trim.
  3. Disconnect the electrical harness connector.
    Fig 2: Removing/Installing Electrical Harness Connector & Mounting Bracket Fasteners
    GC0029271Courtesy of CHRYSLER LLC
  4. Remove the mounting bracket fasteners.
  5. Remove the hands free module fasteners from the mounting bracket and remove module.
scientia non olet · About LEMON Manuals