LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2008 >> Commander Limited, 4.7 N, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Electronic Control Modules >> Module-Glow Plug >> Removal >> ECM
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Module-Glow Plug: Removal: ECM

  1. Disconnect the negative battery cable.
    Fig 1: Glow Plug Module
    GC0052481Courtesy of CHRYSLER LLC
  2. Disconnect the battery positive harness connector (3) from the glow plug module.
  3. Disconnect the glow plug harness connector (4).
  4. Remove the two glow plug module bolts (2).
  5. Remove the glow plug module (1).
scientia non olet · About LEMON Manuals