5 Volt Supply - Pcm Output

The PCM supplies two regulated 5 volts supplies - a 5V primary and a 5V secondary (auxiliary) to the following sensors:

1. Camshaft Position Sensor (5V secondary)
2. Crankshaft Position Sensor (5V primary)
3. EGR Position feedback sensor (5V secondary) (if equipped)
4. Engine coolant temperature sensor (connected to 5V internal via a pullup resistor)
5. Inlet Air Temperature Sensor (connected to 5V internal via a pullup resistor)
6. Knock sensor (connected to 5V internal via a pullup resistor)
7. Manifold absolute pressure sensor (5V secondary)
8. Oil Pressure Switch (connected to 5V internal via pullup resistor)
9. Pedal Value Sensor #1 (5V Primary)
10. Pedal Value Sensor #2 (5V Secondary)
11. SRV Position Feedback Sensor (5V Secondary)
12. Throttle Position Sensors (5V Primary)
13. Variable Line Pressure Sensor (5V Secondary)