LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2008 >> Grand Cherokee SRT-8 >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Electronic Control Modules - Service Information >> Module-Engine Control >> Removal >> Engine Control Module (ECM)
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Engine Control Module (ECM)

  1. Remove the battery. Refer to REMOVAL .
  2. Remove the battery tray. Refer to REMOVAL .
    Fig 1: ECM Hold Down Bolts
    GC0058456Courtesy of CHRYSLER LLC
  3. Disconnect Engine Control Module (ECM) electrical connectors (2).
  4. Remove the two ECM hold down bolts (1).
    Fig 2: Identifying ECM, Bracket & Hold Down Bolts
    GC0058457Courtesy of CHRYSLER LLC
  5. Pull the ECM (1) from the bracket (3).
  6. Remove the ECM from the vehicle.
scientia non olet · About LEMON Manuals