MODULE, Compass: Installation: Installation
- Position the Remote Compass Module (RCM) (2) into the bracket on the upper side of the headliner (1).
- Install the RCM retaining screws (4).
- Connect the electrical connector (3).
- Install the headliner assembly. Refer to Body/Interior/HEADLINER - Installation .
- Connect the battery negative cable.
- Perform the Compass Variation Adjustment. Refer to Electrical - Message Systems/Overhead Console/CENTER, Electronic Vehicle Information - Standard Procedure .
- Perform the Compass Calibration. Refer to Electrical - Message Systems/Overhead Console/CENTER, Electronic Vehicle Information - Standard Procedure .
- Verify proper compass operation.