Module-Remote Compass: Installation
WARNING: This page is about a different car, the 2008 Jeep Commander. However, it is still accessible from the selected car via links, so may be relevant.
- Position the Remote Compass Module (RCM) (2) into the bracket on the upper side of the headliner (1).
- Install the RCM retaining screws (4).
- Connect the electrical connector (3).
- Install the headliner assembly, refer to INSTALLATION .
- Connect the battery negative cable.
- Perform the Compass Variation Adjustment, see STANDARD PROCEDURE .
- Perform the Compass Calibration, see STANDARD PROCEDURE .
- Verify proper compass operation.