LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2009 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition Control (Service Information) >> RELAY, Glow Plug >> Removal >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

RELAY, Glow Plug: Removal: Removal

Fig 1: GLOW PLUG RELAY - RHD
GC0130774Courtesy of CHRYSLER LLC
  1. RIGHT HAND DRIVE: 
  2. The glow plug relay (3) is located near the front of the battery (1).
  3. Disconnect negative battery cable.
  4. Carefully pull out mounting pin (2).
  5. Disconnect electrical connector (4) from relay.
    Fig 2: GLOW PLUG RELAY - LHD
    GC0124645Courtesy of CHRYSLER LLC
  6. LEFT HAND DRIVE: 
  7. The glow plug relay (3) is located near the side of the battery (1).
  8. Disconnect negative battery cable.
  9. Carefully pull out mounting pin (2).
  10. Disconnect electrical connector (4) from relay.
scientia non olet · About LEMON Manuals