Charge/Test Menu
Automatically tests and charges battery, starting, and charging system. Generates a warranty code for Replace and Bad Cell decisions.
Pre Delivery Inspection (PDI): For testing delivered vehicles and lot maintenance. Uses the same inputs as a diagnostic charge.
Dual Battery Charge mode allows the charger to be used with dual battery systems.
Makes high output current available to boost charge an in-vehicle battery and assist in starting the engine.
Provides a timed charge that ranges from 5 to 120 minutes or a continuous charge that ends when you press the STOP key.
In this mode the charger can provide a trickle charge for long term, low amp battery charging.
Generates 15-digit warranty codes for physically defective batteries or customer good will.