Ignition Switch

WARNING: This page is about a different car, the 2011 Jeep Patriot and 2011 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Ignition Switch Mounting Screw

Courtesy of CHRYSLER LLC

NOTE:

Lock cylinder housing removed from column.

Remove the ignition switch (2) mounting screw (1).

Fig 2: Ignition Switch Removal/Installation
Courtesy of CHRYSLER LLC
Pull the switch (1) straight out and off the retaining tabs (2) located on the lock cylinder housing.