Module, Drivetrain Control: Operation: Operation: Inputs/Outputs
WARNING: This page is about a different car, the 2016 Dodge Charger and 2015 Dodge Charger. However, it is still accessible from the selected car via links, so may be relevant.
The following are inputs to the DTCM:
- Transfer Case Mode Sensor Signal
- 1 Direct Battery Feed
- Ignition RUN Sense
- Sensor Ground
- Module Ground
- CAN C Bus
The following are outputs of the DTCM:
- Transfer Case Motor Brake Control
- 5V Sensor Supply
- Transfer Case Bi-directional Motor Control (A AND B)
- Switched B+ Solenoid Supply
- Transfer Case Motor Brake Control