LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2012 >> Compass Limited, AWD, Automatic CVT, CVT2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 489 (Electronic Control Modules (Service Information)) >> Module, Fuel Pump Control >> Removal >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module, Fuel Pump Control: Removal: Removal

WARNING: This page is about a different car, the 2016 Dodge Charger and 2015 Dodge Charger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the negative battery cable.
  2. Remove the trim from the right quarter inner panel to access Fuel Pump Control Module (FPCM), which is located just behind the right rear wheel house. Refer to CARPET, REMOVAL .
    Fig 1: Fuel Pump Control Module Connector & Fasteners
    GC0170603Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the body wire harness connector (2) from the FPCM.
  4. Remove the fasteners (1) that secure the FPCM to the quarter inner panel.
  5. Remove the FPCM from the vehicle.
scientia non olet · About LEMON Manuals