LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2012 >> Compass Limited, AWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 103 (Message Center (Service Information)) >> Module, Compass >> Standard Procedure >> Compass Variance Adjustment >> Set The Compass Variance Manually As Follows:
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Set The Compass Variance Manually As Follows:

WARNING: This page is about a different car, the 2012 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: U-Connect Touch Display (Settings)
GC0144864Courtesy of CHRYSLER GROUP, LLC
  1. Using the Variance Settings Map, find your geographic location and note the zone number.
  2. Turn the ignition switch to the ON/RUN position.
  3. Using the U-Connect Touch ™ screen, select SETTINGS  either from the hard controls on the side of the screen, or from the menu selections at the bottom of the screen, depending on model.
  4. Scroll through the menu, and select COMPASS VARIANCE  .
  5. Once selected, toggle through the zone numbers (1-15), until the zone number for your geographic location appears in the display. The zone number will set automatically.
    NOTE:

    The default for the compass variance from the factory is 8. During programming, the Zone value will wrap around from Zone 15 to Zone 1.

  6. Press the BACK  button to return to the main menu.
  7. Confirm that the correct direction is now indicated by the compass.
scientia non olet · About LEMON Manuals