Control Circuit Testing
WARNING: This page is about a different car, the 2015 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
The starter control circuit components should be tested in the order in which they are listed, as follows:
- Starter Relay - The starter relay is located within the PDC. Refer to DIAGNOSIS AND TESTING .
- Starter Solenoid - Refer to STANDARD STARTING SYSTEM .
- Ignition Switch - Refer to Ignition Switch and Key Lock Cylinder
- Clutch Pedal Position Switch - If equipped with manual transmission, refer to Clutch Pedal Position Switch .
- Park/Neutral Position Switch - If equipped with automatic transmission, refer to appropriate AUTOMATIC TRANSMISSION-SERVICE INFORMATION article for Park/Neutral Position Switch .
- Wire harnesses and connections - refer to appropriate SYSTEM WIRING DIAGRAMS article .