LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2012 >> Compass Limited, AWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 508 (Ignition System (Service Information)) >> Specifications >> Torque Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Torque Specifications

WARNING: This page is about a different car, the 2016 Dodge Charger and 2015 Dodge Charger. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS

DESCRIPTION N.m Ft. Lbs. In. Lbs. NEW FASTENER(1)
Camshaft Position Sensor Bolt (CMP) - 3.6L 9 - 80  
Camshaft Position Sensor - 5.7L 12 9 -  
Camshaft Position Sensor - 6.2L 12 9 -  
Camshaft Position Sensor - 6.4L 12 9 -  
Ignition Capacitor 10 - 89  
Ignition Coil Mounting - 3.6L 7 - 62  
Ignition Coil Mounting - 5.7L 7 - 62  
Ignition Coil Mounting - 6.2L 7 - 62  
Ignition Coil Mounting - 6.4L 7 - 62  
(2) Knock Sensor - 3.6L 22 16 -  
(2) Knock Sensor - 5.7L 20 15 -  
(2) Knock Sensor - 6.2L 20 15 -  
(2) Knock Sensor - 6.4L 20 15 -  
Spark Plugs - 3.6L 18 13 -  
Spark Plugs - 5.7L 27 20 -  
Spark Plugs - 6.2L 27 20 -  
(3) Spark Plugs - 6.4L 18 13 -  
Variable Valve Timing Solenoids - 3.6L 4 - 35  
Negative Battery Cable Nut 5 - 45  
(1) NEW FASTENER:  Do not reuse these fasteners. If removed, a new fastener must be installed and tightened to specification.
(2) Do not apply any sealant, thread-locker or adhesive to bolts. Poor sensor performance may result.
(3) Torque critical tapered design. Do not exceed 21 N.m (15 ft. lbs.).
scientia non olet · About LEMON Manuals