Section 513 (Battery System - Service Information): Specifications: Torque
WARNING: This page is about a different car, the 2016 Dodge Charger and 2015 Dodge Charger. However, it is still accessible from the selected car via links, so may be relevant.
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. | NEW FASTENER* |
|---|---|---|---|---|
| Battery Terminal Clamp Pinch-Bolt Hex Nut | 5 | - | 45 | |
| Negative Battery Cable Remote Terminal Nut | 16.5 | - | 145 | |
| Positive Battery Cable Remote Terminal Nut | 16.5 | - | 145 | |
| Battery Hold Down Bolt | 16 | - | 142 | |
| Starter Solenoid B(+) Terminal Stud Nut | 13 | - | 115 | |
| Battery Negative Cable Ground Eyelet Terminal To Engine Block Bolt | 16.5 | - | 145 | |
| PDC B(+) Terminal Stud Nut | 10 | - | 90 | |
| Battery Tray Support Bolt | 16 | - | 142 | |
| Battery Tray Bolt | 16 | - | 142 | |
| Intelligent Battery Sensor Ground Terminal | M8 15 | 133 | ||
| Intelligent Battery Sensor Pole Clamp | 7 | 53 | ||
| *NEW FASTENER: Do not reuse these fasteners. If removed, a new fastener must be installed and tightened to specifications. | ||||