Module, Steering Column Control: Removal: Removal: Disassembly

Fig 1: Left Multi-Function Switch Stalk Retaining Screw

Courtesy of CHRYSLER GROUP, LLC

1. Remove the left multi-function switch stalk retaining screw (2).
2. Pull the left stalk out of the SCCM.
   Fig 2: Left Stalk Electrical Connector

   Courtesy of CHRYSLER GROUP, LLC
3. Disconnect the left stalk electrical connector.
4. Separate the left switch from the SCCM.
   Fig 3: Right Multi-Function Switch Retaining Screw

   Courtesy of CHRYSLER GROUP, LLC
5. Remove the one right multi-function switch retaining screw.
6. Pull right switch out of SCCM.
   Fig 4: Right Stalk Electrical Connector

   Courtesy of CHRYSLER GROUP, LLC
7. Disconnect the right switch electrical connector.