3.6L Engine

WARNING: This page is about a different car, the 2011 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: 3.6L Engine Block Heater & Cylinder Block

Courtesy of CHRYSLER LLC

Clean block core hole and heater seat.
Insert heater block (1) assembly.
With block heater seated, tighten screw (2) to 12N.M (106 in.lbs.) to assure a positive seal.
Install power cord plug to block heater (1).
Fill cooling system with coolant to the proper level. Refer to STANDARD PROCEDURE .

Fig 2: A/C Compressor
Courtesy of CHRYSLER LLC
Install the A/C compressor. Refer to COMPRESSOR, A/C , INSTALLATION .