LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2012 >> Grand Cherokee SRT-8 >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection, Diesel >> Sensor, Boost Pressure >> Removal >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Sensor, Boost Pressure: Removal: Removal

Fig 1: Intake Air Temperature Sensor/Boost Pressure Sensor, Fastener & Connector
GC0146601Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect the negative battery cable.
  2. Remove the engine cover.
  3. Disconnect the boost pressure sensor harness connector (1).
  4. Remove fastener (3), and the boost pressure sensor (2).
scientia non olet · About LEMON Manuals