LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2012 >> Liberty Limited Jet, 4WD, Part Time >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Module, Glow Plug >> Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module, Glow Plug: Installation: Installation

Fig 1: Identifying Glow Plug Relay (Module), ECM Mounting Bracket, Electrical Connector & Pin
GC0085960Courtesy of CHRYSLER GROUP, LLC
NOTE:

The glow plug module (1) is located in the engine compartment. It is attached to the Powertrain Control Module (PCM) mounting bracket (2).

  1. Connect glow plug module wire harness connector (3) to glow plug module (1).
  2. Position the glow plug module to mounting bracket (2) and install pin (4).
scientia non olet · About LEMON Manuals