Diagnostic Test

OCCUPANT RESTRAINT CONTROLLER ROLL OVER FEATURE DISABLED
1. Turn the ignition on.
2. With the scan tool read the ORC Roll Over Feature status Enabled or Disabled.
  Does the scan tool show Roll Over Feature Disabled?
  
  Yes
  - After repairs are complete use the scan tool to enable the Roll Over Feature.
  - Refer to STANDARD PROCEDURE and perform the AIRBAG SYSTEM VERIFICATION TEST.
  No
  - Replace the ORC in accordance with the Service Information.
  - Refer to STANDARD PROCEDURE and perform the AIRBAG SYSTEM VERIFICATION TEST.