Module, Compass: Removal: Removal
WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect and isolate the battery negative cable.
- Remove the passenger side airbag. Refer to AIR BAG, PASSENGER, REMOVAL .
- Release the clips (3) securing the Remote Compass Module (RCM) (2) to the upper instrument panel cover.
- Disconnect the RCM electrical connector (1) and remove the RCM from the vehicle.