LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2012 >> Wrangler Sahara, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Electronic Control Modules (Service Information)) >> Module, Keyless Ignition Node >> Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module, Keyless Ignition Node: Installation: Installation

WARNING: This page is about a different car, the 2014 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Wire Connector, Clips & KIN
GC0147718Courtesy of CHRYSLER GROUP, LLC
  1. Push the Keyless Ignition Node (KIN) (3) into the instrument panel. Tab on KIN will line up with notch in the instrument panel, push in until the KIN clips securely into place.
  2. Connect the wire connector (1)to the KIN module.
    Fig 2: Instrument Panel Center Bezel
    GC0147701Courtesy of CHRYSLER GROUP, LLC
  3. Install the instrument panel center bezel (1). Refer to BEZEL, INSTRUMENT PANEL, CENTER, INSTALLATION .
    Fig 3: Bezel Assembly
    GC0147717Courtesy of CHRYSLER GROUP, LLC
  4. Install the switch bank assembly. Refer to POD, SWITCH BANK, INSTALLATION .
  5. Connect the negative battery cable.
scientia non olet · About LEMON Manuals