Module, Powertrain Control: Installation: Gas

WARNING: This page is about a different car, the 2016 Dodge Journey and 2015 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: PCM, Connectors & Bracket

Courtesy of CHRYSLER GROUP, LLC

NOTE:

USE THE SCAN TOOL TO REPROGRAM THE NEW POWERTRAIN CONTROL MODULE (PCM) WITH THE VEHICLES ORIGINAL IDENTIFICATION NUMBER (VIN) AND THE VEHICLES ORIGINAL MILEAGE. IF THIS STEP IS NOT DONE, A DIAGNOSTIC TROUBLE CODE (DTC) MAY BE SET.

Install PCM (2) to bracket (1) with 4 bolts (3).

Fig 2: PCM & Connectors
Courtesy of CHRYSLER GROUP, LLC
Install and lock the 2 electrical connectors (1) to the PCM (2).
Connect negative battery cable, tighten nut to 5 N.m (45 in. lbs.).
Use the scan tool to reprogram new PCM with vehicles original Identification Number (VIN) and original vehicle mileage.