LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2012 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 191 (Electronic Control Modules (Service Information)) >> Module, Glow Plug >> Installation >> Installation >> Right Hand Drive
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Right Hand Drive

WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Glow Plug Relay (Right Hand Drive)
GC0130774Courtesy of CHRYSLER GROUP, LLC
NOTE:

The glow plug module (3) is located near the front of the battery (1).

  1. Connect the wire harness connector (4) to the glow plug module.
  2. Position the glow plug module (3) and install the mounting pin (2).
  3. Connect the negative battery cable.