Module, Transmission Control: Removal: Removal
WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect and isolate the negative battery cable.
- Remove the knee bolster/steering column lower panel. Refer to COVER, STEERING COLUMN OPENING, REMOVAL .
- Disconnect the wiring harness connectors from the Transmission Control Module (TCM).
- Remove the fasteners securing the TCM to the vehicle.
- Remove the TCM from the vehicle.